SCRAIL® ROOFLOC® system
The SCRAIL® ROOFLOC® system was developed to install trapezoidal sheet metal roofs and façades quickly and efficiently. The achievable performance increase is 100% and more. The SCRAIL® ROOFLOC® nail screw is pneumatically driven in with the ROOFLOC® installation tool of the FASCO® tool line from BECK and can be completely unscrewed for repair work.
-
The SCRAIL® ROOFLOC® system is approved for wood applications (acc. to CE-EN14592) as well as for sheet metal to wood applications (acc. to general type approval DiBt: Z-14.4-818).
-
With a general construction type approval from DIBt, it has been extensively tested for fastening to the substrate so that the system has also found its way into the regulations for lightweight metal construction (IFBS).
Product variants
Technical data
Scrail
Thread type
Steelthread
Collation type
Plastic Sheet Strip
Inner diameter
3.8 mm | 0.148"
Outer diameter
4.2 mm | 0.165"
Length
37 - 75 mm | 1.5 - 3"
Drive type
HEX key
Strip capacity
30
Head type
ROOFLOC® head
Finish
FASCOAT®, FASCOAT® painted
Material
Stainless Steel 304 / A2, Standard steel
Collation degrees
0°
FASCO® tool
FASCO F58AC ROOFLOC-75
Tool
Item number
000011547.02
Fastener type
0° Plastic Sheet Strip Roofloc® SCRAIL®
Magazine capacity
30
Nail length
37 - 75 mm | 1.5 - 3"
Height
375 mm | 14.76"
Width
130 mm | 5.12"
Length
415 mm | 16.34"
Weight
4.13 kg | 9.1 lbs
Pressure
7 - 8 bar | 100 - 120 psi
Loading
rear loading
Applications
Roofing
Siding
Standards and test marks
DIbt - General construction technique permit Z-14.4-818
SCRAIL® ROOFLOC® nail screws have a general technical approval (DIBT: Z-14.4-818) and a CE (EN 14592) compliance mark.
